Our R & D department is recognised by Department of
Scientific & Industrial Research (DSIR), Govt. of India
Raw material
shadow Left shadow Right




Vitrified polished tiles invariably possess a surface sensitive to staining agents. The problem is accelerated by the demand for shorter firing cycles. The degradation of the surface is mainly due to the opening of the closed pores/micropores during the polishing procedure. High gloss is a very big demand for polished tiles. The gloss value is affected by surface defects and scratches which scatter light thereby reducing the reflection. HiProtect provides a solution to both the above mentioned issues.


HiProtect - A is a water based compound. When the compound is applied on the tile surface using Nano Polishing equipment, the material enters the micro pores and also fills up any surface defects on the tile surface. The material filled inside the pores polymerise by oxidative polymerization and subsequently expand thereby filling up the pores. This increases the gloss of the tile surface, and reduces its staining characteristic.


HIPROTECT B is an organic solvent based liquid. The liquid penetrates and seals any remaining fine micro pores and gaps between polymerized Compound A and tile body. On evaporation of the solvent, the tile provides a high gloss and stain free surface.

Hiprotect B (Water Based)


Lower consumption

Lower cost

Suitable for Vitrified and Glazed Vitrified tiles.


Application Procedure on Tiles

Spray/pour about 15 grams of HiProtect-A on the tile surface (60cm x 60cm) followed by buffing using the first (16) heads.

Ensure tile surface is totally clean, and gloss is above 90 (@ 600 angle) before application of HiProtect-B.

Spray/pour about 5 grams of HiProtect-B on the tile surface and buff using the remaining (3) heads.

       A o o o o o o o o A o o o o o o o o B o o o


The products work in combination only.

Copyright 2022 ENDURA IPNR · All rights reserved